KLINGERsil C4500
It is a widely used gasket material, especially for concentrated alkalis. It has excellent chemical stability and is suitable for steam. Also suitable for industrial caustic soda, such as pulp and paper or alumina refining, or other high quality sealing products required for industry.
3XA double-sided anti bonding coating keeps gaskets and flanges apart and reduces installation and maintenance time without grease and sealant used during installation and maintenance.
technical parameter
Please note that the following chart shows only the guideline, which is referenced according to the thickness of the gasket and the specific operating conditions. This parameter refers to a thickness of 2 mm, and all operations, I, temperature and pressure, depending on the contact of the chemical medium. Please refer to the relevant chemical media application form of KLINGER company or use KLINGERexpert computer design software.
最高操作温度 | 450 | °C |
最高操作压力 | 130 | bar |
压缩率 ASTM F36A | 12 | % |
回弹率 ASTM F36A (min) | 60 | % |
KLINGER 热压实验 25 MPa 300°C | ||
厚度减少 23°C | 10 | % |
厚度减少 300°C | 15 | % |
拉抻应力 ASTM F152 across grain | 12 | MPa |
气体泄露 DIN 3535/6 | <1.0 | ml/min |
应力松弛 BS7531 | 30 | MPa |
应力松弛 DIN 52913 (16h, 300°C) | 32 | MPa |
重量减少 ASTM F146 | ||
ASTM 油 No. 3 (5h/150°C) | 3 | % |
ASTM 燃料油 B (5h/23°C) | 5 | % |
厚度增加 ASTM F146 | ||
ASTM 油 No. 1 (5h/150°C) | 0 - 10 | % |
ASTM 油 No. 3 (5h/150°C) | 0 - 10 | % |
ASTM 燃料油 A (5h/23°C) | 0 - 10 | % |
ASTM 燃料油 B (5h/23°C) | 0 - 10 | % |
密度 | 1.4 | g/cm3 |
适用范围pH | 4 - 14 | pH |
注：采用通用的非石棉材料测试方法。
认证：
氧气应用认证 (100bar/85°C) - BAM (联邦德国研究院)
食物残留 - LNE (法国国家试验室)
防火 - BS5146
饮用水 - KTW (德国)
满足 BS7531 Grade X
气体供应 - DVGW No. 92.02e052 (德国气、水协会)
| KLINGER PT图 |
注意： KLINGER PT 图仅提供设计指导 – 没有压力/温度限制，具体参考 KLINGER expert 垫片设计软件。
|
Service No.1
Cell phone sweep