KLINGERsil C8200
A new acid resistant gasket used in strong organic acids and inorganic acid media. It is an unprecedented and excellent product.
3XA double sided anti adhesive coating keeps gaskets and flanges apart, reduces installation and maintenance time, and eliminates grease and sealants required during installation and maintenance.
technical parameter
Please note that the following chart shows only the guideline, which is referenced according to the thickness of the gasket and the specific operating conditions. This parameter refers to a thickness of 2 mm, and all operations, I, temperature and pressure, depending on the contact of the chemical medium. Please refer to the relevant chemical media application form of KLINGER company or use KLINGERexpert computer design software.
最高操作温度 | 200 | °C |
最高操作压力 | 60 | bar |
压缩率 ASTM F36A | 9 | % |
回弹率 ASTM F36A (min) | 55 | % |
KLINGER 热压实验t 25 MPa 300°C | ||
厚度减少 23°C | 7 | % |
厚度减少 300°C | 11 | % |
气体泄露 DIN 3535/6 | <1.0 | ml/min |
应力松弛 BS7531 | 18 | MPa |
密度 | 1.7 | g/cm3 |
应用于pH | 1 - 11 | pH |
耐酸 DIN3754 | ||
H2SO4 96% 18h/23°C | 10 | % |
H2SO4 65% 48h/23°C | 8 | % |
注:1、实验采用通用的非石棉垫片测试标准。
2、仅仅用于非氧化性酸 (例如: HCL 和H2SO4).
认证:
满足BS7531 Grade X
KLINGER PT 图 | |
注意: KLINGER PT 图仅提供设计指导 – 没有压力/温度限制,具体参考 KLINGER expert 垫片设计软件。
|