KLINGERsil C4430
Represents a new standard for compressed man-made fibers. The first non asbestos gasket to achieve CAF (compressed asbestos fiber) grade. Excellent quality, excellent chemical medium durability, suitable for chemical, gas, water, oil, fuel and so on. .
3XA double-sided anti bonding coating keeps gaskets and flanges apart and reduces installation and maintenance time without grease and sealant used during installation and maintenance.
technical parameter
Please note that the following chart shows only the guideline, which is referenced according to the thickness of the gasket and the specific operating conditions. This parameter refers to a thickness of 2 mm, and all operations, I, temperature and pressure, depending on the contact of the chemical medium. Please refer to the relevant chemical media application form of KLINGER company or use KLINGERexpert computer design software.
最高操作温度 | 430 | °C |
最高操作压力 | 100 | bar |
压缩率 ASTM F36A | 8 | % |
回弹率 ASTM F36A (min) | 50 | % |
KLINGER 热压实验 MPa 300°C | ||
厚度减少 23°C | 8 | % |
厚度减少 300°C | 11 | % |
拉抻应力 ASTM F152 across grain | 17 | MPa |
气体泄露 DIN 3535/6 | 1.0 | ml/min |
应力松弛 BS7531 | 31 | MPa |
应力松弛 DIN 52913 (16h, 300°C) | 35 | MPa |
重量增加 ASTM F146 | ||
ASTM 油 No. 3 (5h/150°C) | 3 | % |
ASTM 燃料油 B (5h/23°C) | 5 | % |
厚度增加 ASTM F146 | ||
ASTM 油 No. 1 (5h/150°C) | 0 - 5 | % |
ASTM 油 No. 3 (5h/150°C) | 0 - 5 | % |
ASTM 燃料 A (5h/23°C) | 0 - 5 | % |
ASTM 燃料 B (5h/23°C) | 0 - 5 | % |
密度 | 1.7 | g/cm3 |
注: 采用全球通用的非石棉材料测试方法。
认证
易燃气体输送 - AGA No. 208 (澳洲气体协会)
气体输送- DVGW No. 92.01e052 (德国气、水协会)
饮用水 – 澳洲标准 AS4020 & WRC (英国水务局)
氧气认证 (100bar/85°C) - BAM (德国联邦实验和研究院)
食物残留 - LNE (法国国家实验室)
防火认证 - BS5146
船级认证 - Lloyds (德国)
饮用水 - KTW (德国)
满足 BS7531 Grade X
KLINGER PT 图 | |
注意: KLINGER PT 图仅提供设计指导 – 没有压力/温度限制,具体参考 KLINGER expert 垫片设计软件。
|