KLINGERsil C4400
A non asbestos material with excellent heat resistance. Excellent heat resistance and high load to ensure its reliability, continuous high torque and excellent sealing performance. Apply to water, gas, hydrocarbons, alkalis and strong acids.
3XA double-sided anti bonding coating keeps gaskets and flanges apart and reduces installation and maintenance time without grease and sealant used during installation and maintenance.
technical parameter
Please note that the following chart shows only the guideline, which is referenced according to the thickness of the gasket and the specific operating conditions. This parameter refers to a thickness of 2 mm, and all operations, I, temperature and pressure, depending on the contact of the chemical medium. Please refer to the relevant chemical media application form of KLINGER company or use KLINGERexpert computer design software.
最高操作温度 | 400 | °C |
最高操作压力 | 100 | bar |
压缩率 ASTM F36A | 11 | % |
回弹率 ASTM F36A (min) | 55 | % |
KLINGER 热压实验 25 MPa 300°C | ||
厚度减少 23°C | 10 | % |
厚度减少 300°C | 22 | % |
拉伸强度ASTM F152 | 15 | MPa |
气体泄露 DIN 3535/6 | 0.2 | ml/min |
压力松弛 BS7531 | 23 | MPa |
压力松弛 DIN 52913 (16h, 300°C) | 25 | MPa |
重量增加 ASTM F146 | ||
ASTM 油 No. 3 (5h/150°C) | 3 | % |
ASTM 燃料油 B (5h/23°C) | 5 | % |
厚度增加 ?ASTM F146 | ||
ASTM 油 No. 1 (5h/150°C) | 0 - 5 | % |
ASTM 油 No. 3 (5h/150°C) | 0 - 5 | % |
ASTM 燃料油 A (5h/23°C) | 0 - 5 | % |
ASTM 燃料油l B (5h/23°C) | 0 - 5 | % |
密度 | 1.6 | g/cm3 |
注: 检测标准系采用通用的非石棉垫片检测标准。
通过认证
气体输送 - DVGW No. 88.01e052 (德国气、水协会)
饮用水 - WRC (英国水务局)
氧气认证 (100bar/80°C) - BAM (德国联邦实验和研究院)
船务认证 - Lloyds (德国)
饮用水 - KTW (德国)
符合 BS7531 Grade Y 标准
| KLINGER PT 图 |
注意： KLINGER PT 图仅提供设计指导 – 没有压力/温度限制，具体参考 KLINGER expert 垫片设计软件。
|
Service No.1
Cell phone sweep