KLINGERsil C4243
An economical type of non asbestos gasket widely used.
3XA double sided anti bonding coating keeps gaskets and flanges apart, reducing installation and maintenance time. Grease and sealant are not necessary for installation and maintenance.
technical parameter
Please note that the following chart shows only the guideline, which is referenced according to the thickness of the gasket and the specific operating conditions. This parameter refers to a thickness of 2 mm, and all operations, I, temperature and pressure, depending on the contact of the chemical medium. Please refer to the relevant chemical media application form of KLINGER company or use KLINGERexpert computer design software.
最高操作温度 | 200 | °C |
最高操作压力 | 80 | bar |
压缩率 ASTM F36A | 8 | % |
回弹率 ASTM F36A (min) | 55 | % |
KLINGER 热压缩实验 50 MPa 200°C | ||
厚度减少 23°C | 10 | % |
厚度减少 200°C | 25 | % |
密封性 DIN 28090-2 | 0.04 | mg/sm |
气体泄露 DIN 3535/6 | 0.4 | ml/min |
应力松弛 DIN 52913 | ||
(16h, 175°C, 50 MPa) | 26 | MPa |
厚度增加 ASTM F146 | ||
ASTM Oil No. 3 (5h/150°C) | 5 | % |
ASTM Fuel B (5h/20°C) | 7 | % |
密度 | 1.75 | g/cm3 |
注: 采用通用的非石棉垫片测试方法测试。
KLINGER PT 图 | |
注意: KLINGER PT 图仅提供设计指导 – 没有压力/温度限制,具体参考 KLINGER expert 垫片设计软件。
|